Marine & Boatyard
Keep marine metal ahead of the salt — hardware, rails, fittings, dock and trailer metal cleaned and protected with no chemical runoff into the water you work on.
Explore marine work
Rhode Island · Mobile Service
Restoration without the media, dust, or guesswork.
Coastal Laser Restoration brings mobile fiber-laser cleaning directly to your site — lifting rust, coatings, and marine growth with no blasting media and no chemical stripping. Clean surfaces, sound substrates, and a site left the way we found it.
EPA Lead-Safe (RRP) Certified
Certified Laser Safety Officer
OSHA Certified
Zero Chemical Runoff
No solvents or slurry into soil, water, or the bay
Surface-Safe Precision
Lifts rust & coatings without gouging or warping
100% Mobile
We come to you — cleaned in place, on-site
How Laser Cleaning Works
Focused light does the work — the surface underneath stays the priority.
A controlled laser pulse breaks the bond between a coating or contaminant and the surface beneath it, lifting rust, paint, and grime as mostly dry particulate that's captured with vacuum and filtration — instead of bags of spent media or chemical slurry.
Non-contact & surface-conscious
Nothing physically scrapes the surface, so profiles, edges, and details can be preserved when parameters are right.
Precise & controllable
Power and pulse are dialed in per material and confirmed with test patches before any larger scope.
Clean by design
No blasting media and no chemical stripping — nothing to contain, haul, or wash into the ground or the bay. A real advantage near the water.
Serving Narragansett Bay & beyond
Who We Serve
Three worlds where surfaces matter.
We match the right laser system and settings to your material and condition — from salt-beaten marine metal to occupied-home woodwork to operating commercial assets.
Residential & Wood
Restore the surfaces your family lives with — cabinets, built-ins, doors, and architectural detail — with containment and dust capture built for occupied homes.
Explore residential workCommercial & Industrial
Protect uptime and stay compliant — equipment, facility metal, fleets, and municipal assets cleaned and prepped on-site, with no media to dispose of and no chemical permitting.
Explore commercial work
Why Laser, Why Coastal
A cleaner method — and an honest one.
Sandblasting and chemical stripping can work, but they bring grit, slurry, waste, and damage risk. When laser is the right fit, it does the job with no media and no chemical baths — and when it isn't, we'll tell you.
01
No media, no chemicals
Mostly dry particulate captured at the source — no spent grit and no chemical slurry to contain or dispose of.
02
Surface-conscious
Non-contact removal that helps preserve sound metal, wood, and detail when parameters are right.
03
Done in place
Mobile rig comes to your site — no crating or hauling assets to a blast facility.
04
Certified & safe
Class 4 program built on ANSI Z136.1 & OSHA, led by a Certified Laser Safety Officer, EPA Lead-Safe certified.
Restore & Protect
Cleaning is only half the job. Keeping it clean is the other half.
Removing rust or a failed coating gets you back to sound metal — but the coastal environment goes right back to work the moment we leave. On suitable projects we don't just restore the surface, we help it stay ahead of corrosion on a recurring basis.
Protectant products are matched to the specific metal, use, and environment. They are maintenance-oriented — not permanent coatings or lifetime rust-proofing.
1 · Clean with laser
Lift rust, coatings, and contamination where laser is the right fit.
2 · Apply protectant
Maintenance-grade products help slow flash rust and stretch maintenance intervals.
3 · Schedule checkups
Periodic visits on critical metal so you stay ahead of corrosion — not chasing it.
Safety Is The Backbone
Safety isn't a checkbox here — it's how we run the company.
Coastal Laser Restoration holds safety to the highest standard, and that commitment shows up on every single job before it ever shows up in the finished surface. Every project is planned, controlled, and documented around protecting you, your people, your property, and our crew — with the discipline of a formal Class 4 laser safety program behind it.
If conditions or coatings don't support safe laser use, we stop and tell you straight. That standard is the foundation everything else is built on.
How that shows up on the job
- Class 4 laser work run under a documented safety program, led by a Certified Laser Safety Officer (LSO).
- Built on ANSI Z136.1 laser-safety guidance and OSHA construction & general-industry requirements.
- Controlled work areas, PPE, fume and dust capture, and clear stop-work rules whenever conditions change.
- EPA Lead-Safe (RRP) work practices applied wherever older or historic coatings may contain lead.
Certified Laser Safety Officer · ANSI Z136.1 · OSHA · EPA Lead-Safe (RRP) · Insured & Licensed
Simple From Start To Finish
How a Coastal Laser project runs
01
Tell us the project
Send photos and details through the quote form, or call. We scope the surface, material, and condition.
02
Test & quote
Where useful we confirm fit with a test patch, then send a clear written estimate — no surprises on the day.
03
We come to you
Our mobile rig arrives on-site. Work happens in place, with controlled work areas and capture.
04
Clean & protect
Surfaces left clean and recoat-ready — with optional protectant and maintenance visits.
Where We Work
Mobile across Rhode Island & the South Coast.
Based in Scituate, we bring the rig to marinas, boatyards, shops, job sites, and homes throughout Rhode Island — with reach into nearby Southeastern Massachusetts and Connecticut for the right projects.
ScituateProvidenceNewportBristolNarragansett BayWarwickSouth CountySE MassachusettsEastern CT
Headquarters
Scituate, Rhode Island
Call or text
Booking now for
Projects launching September 2026
About Coastal Laser Restoration
A Rhode Island company built around a better way to clean.
Coastal Laser Restoration LLC is a Scituate-based, owner-operated mobile laser cleaning service. We brought fiber-laser technology to Rhode Island because the old options — sandblasting, grinding, and chemical stripping — are messy, hard on the surfaces they're meant to save, and tough on the coastal environment we live in.
Our promise is simple: the contamination comes off, the surface underneath stays sound, and your site is left clean — and it's all done safely. Safety is the backbone of this company: every job runs under a documented Class 4 laser safety program led by a Certified Laser Safety Officer, fully insured and licensed, with EPA Lead-Safe (RRP) practices applied wherever older coatings call for them.
AC
Austin CollinsFounder & Laser Safety Officer
Let the project drive the method
Not sure if laser is right for your project? Let's find out.
Describe the surface, where it lives, and its current condition — then add clear photos. We'll tell you honestly whether laser alone, laser plus prep, or a different approach is the right call.